Superior Epoxy E-1500 and E-1500S

E‐1500 & E‐1500S are two‐part countertop setting epoxies. Can be used over existing tile, plywood, backer board, cured concrete, masonry and more!

E‐1500 and E‐1500-S are two‐part counter top setting epoxies . Can be used over existing tile, plywood, backer board, cured concrete, masonry and more.  Although used primarily for setting stone counter tops, these adhesives are versatile and can be used in a variety of applications.

E-1500 – Compare to Touchstone™ T-2000

E-1500-S –  Compare to ProSpec™ B-150

The Part B can is located “inside” the Part A tub. Typically, all A&B parts are mixed together but mixing instructions on the label provide for smaller batches.

Although both of these adhesives are slow setting/ slow curing, E‐1500 sets/cures faster and E‐1500-S sets/cures slower.

Can be used for indoor and outdoor applications.

Consistency: Paste
Mix Ratio: All Part B into Part A (2.79 “A” : 1.0 “B” by weight)
E-1500 Gel: 1 – 2 hours
E-1500S Gel: 2 – 3 hours
E-1500 Cure: 8 – 12 hours
E-1500S Cure: 12 – 18 hours
Shelf Life: 1 year
Location: Indoor AND Outdoor
Recommended Application: Natural and Engineered Stone
Recommended Use: Setting stone and tile to plywood, backer board, cured concrete, masonry and more

Be sure to TEST each substrate for bonding and appearance prior to the actual application.

E-1500

Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Mix Part A & B thoroughly until mixture is uniform. At a temperature of 70°F (21°C), the mixture stays workable for 60-90 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. If mixing a partial amount, mix ratio is 2.79:1. Mix 2.79 parts Part A to 1 part Part B. Can be used for both indoor and outdoor applications. Do NOT store above 75°F (24°C).

E-1500S

Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Mix Part A & B thoroughly until mixture is uniform. At a temperature of 70°F (21°C), the mixture stays workable for 60-90 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. If mixing a partial amount, mix ratio is 2.4:1. Mix 2.4 parts Part A to 1 part Part B. Can be used for both indoor and outdoor applications. Do NOT store above 75°F (24°C)

Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.

Superior Epoxy E-1500 E-1500S
1 Gallon Unit

Not just better...superior-adhesives-logo-whi200

Our Company

Superior Stone Products has been built on a simple premise‐‐

Offer the best stone products in the world and back them up with world-class service and support. We are dedicated to serving the needs of today’s stone industry professionals by providing the best products. Everything we do is not just better...it's SUPERIOR!

Questions?

Contact Us